Skip to content
Guide8 min read

Cross-Connect Fees Compared: 2026 Colocation Guide

A cross-connect is a physical cable, usually fiber and sometimes copper, that a data center operator runs between two customers inside the same building, typically through a meet-me room. It is how a colocation tenant reaches a carrier, a cloud on-ramp, an internet exchange or another tenant without leaving the facility. Operators bill it as a one-time installation charge plus a monthly recurring fee, and in 2026 that monthly fee sits anywhere between a few dollars and several hundred dollars depending on who owns the building. This guide compares what buyers are paying, where the published figures come from, and why the cross-connect line grows faster than the rack count once a deployment moves into GPU density.

What does a cross-connect cost in 2026?

Two independent pricing guides published this year land on the same range. IPTP’s colocation pricing breakdown (July 2026, updated September 2026) puts installation at $500 to $1,500 per connection and the recurring charge at $100 to $300 a month. Metro Colo Advisory’s connectivity guide (inputs as of October 2026) quotes $100 to $300 a month in major carrier-neutral facilities, with setup charges of roughly $250 to $1,500.

The widest public range comes from federal contracting. Colocation Scout’s review of GSA EIS awarded rates found monthly fiber cross-connect prices from $44.46 to $688.22, with AT&T at the low end and Lumen and Granite at the high end. The same source lists Iron Mountain’s GSA install charge for federal fiscal 2026 at $122.96, a fraction of the $500 to $1,500 that commercial guides describe.

So the honest answer is a range, not a number. A mid-market regional operator may charge nothing. A carrier-neutral interconnection hub in a Tier 1 market will usually charge $200 to $300 a month per fiber pair, plus a few hundred dollars to install.

What do the published operator rate cards say?

Most operators do not publish commercial cross-connect prices, but a few numbers are on the public record.

SourceChargePublished figurePeriod
Equinix GSA price list (all listed IBXs)Fiber cross-connect, monthly$282.12List dated Nov 2025, retrieved Sep 2026
Equinix GSA price listCopper (COAX or UTP) cross-connect, monthly$197.48Nov 2025
Equinix GSA price listInstall, any media$400 one timeNov 2025
Equinix GSA price listDeinstall$246.85 one timeNov 2025
GSA EIS awarded rates, several carriersFiber cross-connect, monthly$44.46 to $688.22Current schedule
Iron Mountain GSA scheduleInstall$122.96 one timeFY2026
TRG Datacenters, DallasCross-connectsNo chargePolicy page, Apr 2026
IPTP pricing guideInstall and monthly$500 to $1,500; $100 to $300Jul 2026
Metro Colo AdvisoryInstall and monthly$250 to $1,500; $100 to $300Oct 2026

Two details in that table deserve attention. First, the Equinix fiber rate of $282.12 also appears on a February 2019 version of the same GSA list, which means the federal list price has held flat for more than six years while colocation power rates have moved sharply, as our colocation pricing by market guide covers. Second, TRG’s position that cross-connects should be free is backed by its own cost estimate: the operator says an all-in cross-connect costs it $800 to $950 to build, which at a 15 percent unlevered yield would need only about $10 a month to recover. The gap between $10 and $282 is margin, which explains why interconnection carries the highest margins in a colocation business and why operators defend the fee.

Why do carrier-neutral hubs charge more than regional operators?

The price of a cross-connect tracks the value of what sits on the other end of it. In a building with 200 carriers, every major cloud on-ramp and an internet exchange, the cable is the product that tenants came for. In a suburban facility with four carriers, the same cable is closer to a courtesy, and operators price it that way.

Equinix’s own numbers show how much of the business this has become. On its third quarter 2026 call (October 28, 2026), management said interconnection represents 19 percent of revenue, grew 10 percent year over year on a normalized basis, and that the company passed 500,000 interconnections with 6,900 net additions in the quarter. Equinix Fabric revenue grew 24 percent. Colocation Scout’s arithmetic on the second quarter 2026 filing works out to about $363 of monthly interconnection revenue per Americas interconnection, a blended figure that includes Fabric ports and internet access, not a cross-connect price.

Digital Realty reported a similar pattern on October 29, 2026: a record $152 million of bookings from the 0 to 1 MW plus interconnection category, 24 percent of total third quarter bookings, of which $22.2 million was interconnection alone. Interconnection and other revenue rose to $102.6 million from $96.6 million a year earlier.

Regional and secondary-market operators cannot charge for network density they do not have, so some use free or flat cross-connects as the pitch. That trade-off is the same one buyers face when choosing between a Tier 1 market and a secondary one, covered in our market tiers guide: the hub costs more per connection because it offers more to connect to, and the buyer has to decide whether that access is worth the premium.

What hidden charges sit around the monthly fee?

The monthly rate is rarely the whole bill. DataBank’s ordering guide, as summarized by Colocation Scout, shows one cross-connect can generate up to four separate charges: the circuit itself, an expedite fee, remote hands time, and a second charge when the far end lands in another operator’s suite. Metro Colo Advisory notes that the install fee is the item most often missing from an initial quote, and IPTP points out that four connections can run $2,000 to $6,000 in installation before anything is lit.

A practical checklist before signing:

  • Ask for the full cross-connect schedule, not just the fiber monthly rate: copper, intra-customer, deinstall and expedite.
  • Confirm whether a connection to a cloud on-ramp or exchange inside the building is billed once or twice.
  • Lock the rate and the annual escalator in the master agreement. Metro Colo Advisory’s advice is that cross-connect pricing is negotiable at signing, especially when bundled, and far less negotiable later.
  • Check which charges survive a renewal. Our renewal price benchmark shows how line items that looked small at signing become the operator’s negotiating room at year three.

Why does the cross-connect bill grow faster at GPU density?

A traditional enterprise cabinet might hold two or four cross-connects, a primary and a backup carrier and perhaps a cloud on-ramp, so the bill stays small against the power charge.

GPU deployments change the ratio. A cluster that would have filled a dozen 8 kW cabinets now fills two or three liquid-cooled racks, so the number of cabinets falls while the number of external connections rises. Each training or inference pod needs its own paths to storage, to the customer’s other sites and to the cloud regions it exchanges data with, and operators that support 400G and 800G optics typically require dedicated fiber pairs for each. The result is that a 1 MW GPU footprint can carry more cross-connects than a 1 MW enterprise footprint that occupies five times the floor space, and at $250 to $300 a month each, 20 connections add $5,000 to $6,000 a month before any circuit or port charge.

Cloud on-ramps compound it. Metro Colo Advisory’s figures put a 10 Gbps AWS Direct Connect port at about $1,643 a month and a 100 Gbps port at about $16,425, each needing its own cross-connect on top. For a buyer moving training data between a colocation GPU cluster and a hyperscale region, the interconnection stack is now a budget line that belongs in the lease model next to power, and it should be negotiated with the same care as the ramp and take-or-pay terms described in our take-or-pay and ramp schedules guide.

How should buyers compare cross-connect fees between operators?

Normalize the quote to a five-year total. For each shortlisted facility, count the connections the design needs on day one and at full ramp, then price each as install plus 60 months of recurring charge at the quoted escalator. Add the on-ramp or exchange port if the facility hosts it, and add a second circuit charge wherever the far end is in another operator’s suite.

Then weigh the total against what the building gives access to. In Northern Virginia or Dallas-Fort Worth, a higher per-connection fee often buys direct access to every cloud region a buyer uses, which can remove a transit bill larger than the cross-connect bill. In a secondary market, a free cross-connect is only valuable if the carrier or cloud the buyer needs is actually in the meet-me room. Our provider directory lists carrier-neutral status and verified operator details so that check can happen before the site tour.

FAQ:

Q: What is a typical cross-connect fee in 2026?

Published guides from IPTP and Metro Colo Advisory both put the monthly recurring fee at $100 to $300 in major carrier-neutral facilities, with installation charges from roughly $250 to $1,500. Federal GSA rates run from $44.46 to $688.22 a month depending on the carrier, and some regional operators charge nothing.

Q: Does Equinix publish cross-connect prices?

Not commercially. The only public figures are on its GSA federal price list: $282.12 a month for fiber, $197.48 for copper, and a $400 one-time install, with the list dated November 2025, and commercial quotes can differ from the federal schedule.

Q: Are cross-connect fees negotiable?

Yes, at signing. Advisors consistently report that the monthly rate, the install fee and the annual escalator can all be negotiated when they are bundled into the initial colocation agreement, and that they become much harder to move at renewal.

Q: Why do some operators offer free cross-connects?

Operators in secondary markets or with smaller carrier ecosystems use free cross-connects to attract networks and tenants. TRG Datacenters in Dallas, for example, estimates its all-in build cost at $800 to $950 per connection and argues the fee needed to recover it is in the low tens of dollars a month.

Q: How many cross-connects does a GPU deployment need?

It depends on the network design, but high-density deployments usually need more external connections per megawatt than enterprise colocation because each pod requires dedicated fiber paths to storage, other sites and cloud regions, and 400G or 800G optics typically require their own pairs. Buyers should count connections at full ramp, not day one.

Get a quote for colocation with cross-connect pricing included

GoDataCenters sources quotes from carrier-neutral and regional operators across the United States and 100 plus countries, with the cross-connect schedule, on-ramp availability and install fees called out so the connectivity stack can be compared alongside power. Request a quote and we will return matched facilities with the interconnection terms spelled out.

Sources: Colocation Scout, Equinix colocation pricing and cross connect costs; Colocation Scout, colocation pricing 2026; IPTP, how colocation pricing works (2026); Metro Colo Advisory, data center connectivity; Equinix Q3 2026 earnings call transcript, The Motley Fool; Digital Realty 3Q26 results, SEC Form 8-K exhibit; TRG Datacenters, free cross connects.

← All insightsBack to top ↑

EXPLORE THE DIRECTORY

Markets in this article

Keep exploring

All insights →

FROM RESEARCH TO REQUIREMENTS

Your next location starts here.

Search the global directory by location and power, or build a brief with our concierge team.

Search sites ↗Build your brief →